Getting Xorg to let you terminate the X server with Ctrl + Alt + Backspace
This is a saga. You can skip to the end for the actual answer if you're impatient.
Yesterday I wrote about the history of terminating the X server with Ctrl + Alt + Backspace. I've known about this feature for a long time, but I only wind up using it very occasionally, even for Cinnamon on my laptop. This infrequent usage explains how I only recently noticed that it had stopped working on my office machine. When I read the Xorg manpage for another reason recently, I stumbled over the current XKB mechanism. I decided to write a little entry about it, which I decided to save for a day when I was extra tired. Then I decided to do some research first, got some surprises, and wrote yesterday's entry instead.
My initial assumption about why C-A-B wasn't working for me was that the Xorg people had switched it off relatively recently (or changed some magic thing in how you had to turn it on). This 2010 SE question and its answers taught me otherwise; the switch had happened a very long time ago, and I was relatively certain that I had used C-A-B since then on my machines. So what had changed?
These days, the X server is mostly configured through configuration
file snippets in a directory; on at least Fedora, this is
/etc/X11/xorg.conf.d. In my office workstation's directory, I
00-keyboard.conf that dated from the start of 2015 and
looked like this:
# Read and parsed by systemd-localed. # It's probably wise not to edit this # file manually too freely. Section "InputClass" Identifier "system-keyboard" MatchIsKeyboard "on" Option "XkbLayout" "us" Option "XkbModel" "pc105+inet" Option "XkbVariant" "terminate:ctrl_alt_bksp," EndSection
I scanned this and said to myself 'well, it's setting the magic XKB
option, so something else must be wrong'. I switched to using XKB
back at the end of 2015, so at
first I though that my
setxkbmap usage was overwriting this.
However inspection of the manpage
told me that I was wrong (the settings are normally merged), and
an almost identical
00-keyboard.conf on my home workstation worked
with my normal
setxkbmap. So yesterday I tiredly posted my history
entry and muttered to myself.
This morning, with fresh eyes, I looked at this again and noticed
the important thing: this file is setting the XKB keyboard variant,
not the XKB options. It should actually be setting
"XkbVariant". Since there's no such keyboard variant, this
actually did nothing except fool me. I might have noticed the issue
if I'd run '
setxkbmap -query', but perhaps not.
All of this leads to the three ways to enable Ctrl + Alt + Backspace
termination of the X server, at least on a systemd based system.
First, as part of your X session startup you can run
to specifically enable C-A-B, among any other XKB changes you're
setxkbmap -option 'compose:rwin' -option 'ctrl:nocaps' -option 'terminate:ctrl_alt_bksp'
Second, you can manually create or edit a configuration file
/etc/X11/xorg.conf.d or your equivalent to specify
this. If you already have a
00-keyboard.conf or the equivalent,
the option you want is:
Option "XkbOptions" "terminate:ctrl_alt_bksp"
(A trailing comma is okay, apparently.)
Third, if you have Fedora or perhaps any systemd-based distribution,
you can configure this the official way by running
with a command like this:
localectl --no-convert set-x11-keymap us pc105+inet "" terminate:ctrl_alt_bksp
There is a bear trap lurking here. That innocent looking
"" is very
important, as covered in the Arch wiki page.
As they write (with my emphasis):
To set a model, variant, or options, all preceeding fields need to be specified, but the preceding fields can be skipped by passing an empty string with
Given that my original xorg.conf snippet had what should be the
XKB options as the XKB variant, it seems very likely that back
in January 2015, something ran
localectl and left out that
(That I didn't really notice for a bit more than three years shows some mixture of how little I use C-A-B and how willing I am to shrug and ignore minor mysteries involving keyboards and X.)
My laptop had been set up and maintained
as a stock Fedora machine; these days that apparently means that
this option isn't enabled in the xorg.conf stuff. Unlike on my
workstation (where I edited 00-keyboard.conf directly), I did it
the official way through
localectl. I determined the other command
line parameters by looking at the existing
believe that on the laptop, the model (the 'pc105+inet' bit) was
blank, as was the variant.
Sidebar: How my machines got to their Xorg keyboard state
I assume that before that early 2015 change, my office workstation's Xorg configuration had the magic XkbOptions setting that made it work. I'm pretty sure that C-A-B worked at some point since 2010 or 2011 or so. My home machine has a 00-keyboard.conf from October 2011, which is about when I installed Fedora on it, with comments that say it was created by system-setup-keyboard, and that has the necessary XkbOptions setting. My office machine's Fedora install dates to 2006, so it might have had any number of configuration oddities that confused things at some point.
(My home machine got a completely new Fedora 15 install in 2011 as part of digging myself out of my Fedora 8 hole. My office workstation never got stuck on an older Fedora release the way my home machine did, so the Fedora install's never been rebuilt from scratch. Sometimes I get vaguely tempted by the idea of a from-scratch rebuild, but then I get terrified of how much picky work it would be just to get back to where I am now.)