Some ways that servers make their disks not hot-swappable
What exactly makes a "hot-swappable" disk bay? I had assumed that all SAS and SATA connections are always hot-swappable, with maybe the only difference being whether the OS gets automatically poked about new connections or not...
Since I am a little bit grumpy about this, here are some of the ways that servers can have drive bays that aren't hot swappable (I'm sure there's more because server vendors have many ways of making your life more annoying).
The most straightforward way is exemplified by our Dell R210 IIs, which do not so much have drive bays as drive cages. Their drive 'bays' are fully enclosed inside the chassis and can only be removed by taking the top off and then disconnecting separate power and SATA cables. In theory perhaps you could do this while an R210 II was running, but I wouldn't want to attempt it.
The more clever way is that of our Dell R310 IIs (in our configuration). These have externally accessible drive carriers that slide out the front of the chassis, so it looks like you should be able to hot swap them, but the carriers are held in place by latches at the back that can only be accessed by taking the top of the case off and they still plug into ribbon cables. For the Dell R310, Dell calls this the 'cabled hard drive chassis' and it is of course the cheaper option.
The final optional piece of cleverness is that some generations of Dell servers come by default with the BIOS set to explicitly disable any SATA ports that didn't have drives connected in the factory configuration, which generally means all but the first SATA port. This wouldn't stop a hot swap of an existing drive, because you'd already have enabled the SATA port, but it does mean that you can't add an additional hard drive without a trip through the BIOS.
(This can lead to comedy moments when you're setting up a server that's supposed to have a two way or three way mirror and wondering why the installer and so on can only see one drive. Since you have to manually connect the cabling, it's possible to spend some time wondering if you plugged everything in right or the drive is dead before you realize what the real problem is.)